Medical Device Communicator for Debian / Ubuntu   (2 Articles)

A Medical Device Communicator is a computer software that can be downloaded to your PC and works as a DICOM Node in your computer.

Create, Download and Install Medical Device Communicator (MeDiC) for Debian / Ubuntu

In this article, you will learn creation and installation of new MeDiC (Medical Device Communicator) application to your PCs running Microsoft Windows 7, 8, 8.1,10 or Macs running Apple MacOS High Sierra, Mojave. Follow the step below to view and install MeDiC applications.

Step 1: Login to your account and click on the “Settings” icon on the upper right side of the page.

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 2: On application settings section, click on “Medical Device Communicators” menu item on the left side of the page.

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 3: MeDiC applications of the current user will be displayed on the right hand side of the page. For each MeDiC application, its name, created time, operating system, IP and current status will be displayed. If you do not see your MeDiC application click on the “Refresh” button to refresh the MeDiC applications list.

Create, Download and Install Proxy Server for Debian / Ubuntu

To add a new MeDiC, click on “Add new Medical Device Communicator” button on the upper right side of the field.

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 4: The “Select operating system” form will be shown and supported operating systems will be listed on the form. MeDiC applications can run on computers running Microsoft Windows 7, 8, 8.1 or 10. Moreover, it can run on Macintosh computers running Apple MacOS High Sierra or Mojave. Minimum requirements for corresponding operating system can be seen by clicking on the information icon. Choose the operating system that is compatible with your computer.

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 5: Click on the operating system to download MeDiC setup to your computer.

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 6: When setup file is downloaded, click on “PostDICOM_MDC.exe” to run it. PostDICOM Medical Device Communicator Setup page will be opened. Click on the “Next” button.

Create, Download and Install Proxy Server for Debian / Ubuntu

The destination folder selection page will be opened. The software will be installed in the default folder listed in the text area. If you want to select a different location, click on the “Change” button. When setup folder is selected, click on the “Next” button.

Create, Download and Install Proxy Server for Debian / Ubuntu

You are now ready to install PostDICOM MeDiC on your computer. Click on the “Next” button to proceed with the installation.

Create, Download and Install Proxy Server for Debian / Ubuntu

Enter your PostDICOM e-mail address and password and click on “Next” button.

Create, Download and Install Proxy Server for Debian / Ubuntu

If you have more than one institution, please, proceed with caution. Institution Selection Form will be displayed so that you can select the current institution for this MeDiC. This step is very important. Because, each MeDiC application can only work for one Institution. When you send your DICOM files to this MeDiC, every file received by this MeDiC is only saved to the selected institution. After correct institution is selected, click on the “Next” button to continue.

Create, Download and Install Proxy Server for Debian / Ubuntu

In a few seconds, MeDiC installation will be completed. When it is finished, click on the “Finish” button to close the installer.

Create, Download and Install Proxy Server for Debian / Ubuntu

When installation is finished, click on the “Back” button to list your MeDiC application(s).

Create, Download and Install Proxy Server for Debian / Ubuntu

Step 7: You will see newly installed MeDiC in the Medical Device Communicators list with its name, created time, operating system, IP and status information. If you do not see your MeDiC application click on the “Refresh” button to refresh the MeDiC applications list.

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Create, Download and Install Proxy Server for Debian / Ubuntu

Editing Medical Device Communicator (MeDiC) PACS Server Settings for Debian / Ubuntu

In this article, you will learn how to manage PACS Server settings of a Medical Device Communicator (MeDiC) in your account.

MeDiC software must be installed on a local area network (LAN) and DICOM Nodes must be at the same network, otherwise, they can not communicate with each other.

To edit a MeDiC application, click on “Edit” icon on the right side of the page.

Editing Proxy Pacs Server Settings

MeDiC General Settings will be shown.

Editing Proxy Pacs Server Settings

Click on “PACS Server Settings” header on the upper side of the page.

Editing Proxy Pacs Server Settings

In this page, you can see MeDiC PACS Server settings with DICOM Nodes list. MeDiC PACS Server settings are Institution, AE Title, Port and Connection Security. Institution and MeDiC PACS Server AE Title are fixed. You can edit MeDiC PACS Server Port information by writing in related fields. After port number is changed, click on the “Save” button to save the changes. Then MeDiC will automatically restart.

MeDiC software must be installed on a local area network and DICOM Nodes must be at the same network, otherwise, they can not communicate with each other.

Adding a DICOM Node

DICOM request from unregistered nodes will be rejected by the MeDiC PACS Server. Therefore, every modality that will interact with the MeDiC PACS Server must be added to the Nodes list.

You can add a new DICOM Node by following the steps below.

Step 1: Write name and LAN IP of the DICOM Node. Then, add new AE Title by clicking on the “Add” button.

Editing Proxy Pacs Server Settings

Step 2: After clicking the “Add” icon, you can see “AE Title information” section on the lower side on the page. Change automatically filled AE Title and Port information with your medical device’s AE Title and Port information.

Editing Proxy Pacs Server Settings

Step 3: After filling with the correct information, click on the “Update” button to update AE Title List.

Editing Proxy Pacs Server Settings

Step 4: Most of the DICOM Nodes has only one AE Title and Port values. If your DICOM Node has more than one AE Title for different uses, click on the “Add” button to add new AE Title and port information.

To delete an value from the AE Title List, select it by clicking on the item. Then click the “Delete” button.

Editing Proxy Pacs Server Settings

Step 5: After filling the necessary information click on the “Add” button to add newly created DICOM node to the Nodes list.

Editing Proxy Pacs Server Settings

New DICOM node will be added to the Nodes list on the left side of the page.

Editing Proxy Pacs Server Settings

Step 6: To reflect the changes, click on “Save” button on the upper right side of the page. If you close the Settings page without saving, all of the changes will be lost. Make sure that you saved your changes before closing the current window.

Editing Proxy Pacs Server Settings

Editing DICOM Nodes

You can prevent your DICOM nodes to communicate with the MeDiC PACS Server by changing is Active/Passive status. Click on the “Passive” button to make the node passive (Cannot send data to MeDiC PACS Server and cannot receive data from it). Click on the “Active” button to make the node active (can send data to MeDiC PACS Server and can receive data from it). After changing its status click on the “Save” button to save the configuration.

Editing Proxy Pacs Server Settings

To clear all of the information on the “Properties” and “AE Title Information” area click on the “Clear” button.

Editing Proxy Pacs Server Settings

To delete a DICOM Node, click on the node you want to delete. Then, click on “Delete” icon on the right side of the page. Click on the “Save” button to save the configuration.

Editing Proxy Pacs Server Settings

To edit a DICOM Node, click on the node you want to edit. Make necessary changes, then click on the “Update” button on the right side of the page. Finally, click on the “Save” button to save the configuration.

Editing Proxy Pacs Server Settings

To verify (DICOM Echo) a DICOM Node click on the “Verify” button on the right side of the page.

Editing Proxy Pacs Server Settings

Once you have clicked, you will see a message box indicated that verification succeeded or not. Click on “OK” to close the box.

Editing Proxy Pacs Server Settings

Editing Proxy Pacs Server Settings

Activating Local Render in Medical Device Communicator (MeDiC) for Debian / Ubuntu

In this article, you will learn how to enable the Local Render feature of the MeDiC (Medical Device Communicator) application on Macs running Microsoft Windows 7, 8, 8.1,10 or Apple MacOS High Sierra, Mojave. Follow the step below to activate the MeDiC Local Render feature.

Step 1: Login to your account and click on the “Settings” icon on the upper right side of the page.

activating local render support

Step 2: On application settings section, click on “Medical Device Communicators” menu item on the left side of the page.

activating local render support

Step 3: MeDiC applications of the current user will be displayed on the right hand side of the page. For each MeDiC application, its name, created time, operating system, IP and current status will be displayed. If you do not see your MeDiC application click on the “Refresh” button to refresh the MeDiC applications list.

activating local render support

To view MeDiC's settings, click on the "Settings" button at the top right of the field.

activating local render support

Step 4: To view Image Render settings, click the ”Image Render Settings” tab.

activating local render support

Step 5: In this screen, you can make your selections according to the situations where you want to use Image Render feature. You can find explanations for these selections below.

  • You can apply for the date range or after it has been sent to the system.

  • You can apply for images belonging to one or more institutions.

  • You can apply for images of states.

  • You can apply for images of specific modality.

P.S: If we make more than one selection, it will be valid for images that match the intersection of your choices.

Make the relevant selections and Render Support "On" and click the "Save" button.

activating local render support

Step 6: MeDiC needs to be restarted for the Image Render feature to be active. To do this, click on “General Settings” tab and then click the Restart button.

activating local render support

When the local render functionality is active, it will download the images in your PostDICOM account to your computer and render it from there. When a image is rendered from local storage, you will see a icon indicating that feature. Please, look at the image below.

activating local render support